16
QM00991-1
Introduction
Part names
Projector
(1) Speaker (36, 69)
(2) Filter cover (108)
The air lter and intake vent are inside.
(3) Elevator feet (x2) (39)
(4) Remote sensor (32)
(5) Lens (110)
(6) Lens cover
(7) Intake vents
(8) Control panel (17)
(9) FOCUS ring (40)
(10) ZOOM ring (40)
(11) AC (AC inlet) (29)
(12) Exhaust vent
(13) Ports (17)
(14) Security bar (30)
(15) Security slot (30)
►Do not open or remove any portion of the product, unless the
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the light
source is on, since the projection ray may cause a trouble on your eyes.
►Keep any object away from concentrated projection light beam. High
temperatures are generated when the light source is lit. Blocking the beam by
something causes high temperature and could result in re or smoke.
WARNING
►Do not approach or touch the lens or the ventilation
openings while using the projector or for a while after using it to prevent a
burn. Take care of ventilation.
►Do not place anything around the lens and ventilation openings of the
projector.
►Do not attach anything onto the lens except the lens cover of this projector
because it could damage the lens, such as melting the lens.
CAUTION
(continued on next page)
(7)
(6)
(8)
(2)
(3)
(1)
(12)
(11)
(9)
(10)
(4)
(5)
(13)
(14)
(15)
(12)
(12)
(7)
To Next Page
Loading...
