Maxell MP-JU4001 - Page 27

27
QM00991-1
Setting up
Connecting with your devices (continued)
VCR/DVD/Blu-ray Disc
TM
player
COMPONENT
Cb/Pb Y Cr/Pr RL VIDEO
AUDIO
OUT
HDMI
(continued on next page)
• The HDMI
TM
port of this model is compatible with HDCP (High-
bandwidth Digital Content Protection) and therefore capable of displaying a
video signal from HDCP compatible DVD players or the like.
- The HDMI
TM
port supports the following signals.
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
1080i@50/60, 1080p@50/60
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
Computer signal : See the Operating Guide - technical for details.
- This projector can be connected with another equipment that has HDMI
TM
connector, but with some equipment the projector may not work properly,
something like no video.
- Be sure to use an HDMI
TM
cable that has the HDMI
TM
logo.
- Use a Category 2-certied HDMI
TM
cable to input 1080p@50/60, signal to the
projector.
- When the projector is connected with a device having DVI connector, use a
DVI to HDMI
TM
cable to connect with the HDMI
TM
input.
NOTE