Maxell MP-JU4001 - Page 54

54
QM00991-1
PICTURE menu
Item Description
PICTURE
QUALITY
(continued)
ACCENTUALIZER (MP-JU4001 only)
ACCENTUALIZER is a function to improve the legibility.
Using the ◄/► buttons adjusts the sharpness.
Weak
ó
Strong
• There may be some noise and/or the screen may icker for a
moment when an adjustment is made. This is not a malfunction.
HDCR (MP-JU4001 only)
A function to show a clear picture in a bright room.
Using the◄/► buttons adjusts the contrast.
DYNAMIC BLACK
Turns on/o󰀨 the DYNAMIC BLACK function.
Congures the projector to automatically adjust the contrast of the
input image. When a dark video signal is input, the projector
dynamically adjusts the picture contrast.
This function may not work correctly when analog signals contain
noise.
MY MEMORY
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or
ENTER button performs each function.
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may icker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using MY BUTTON. Please
see MY BUTTON item in OPTION menu (

78).
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data stored in a memory will be lost by
saving new data into the memory.