Comet Executive Gas Introduction
1-1
Chapter 1
INTRODUCTION
This chapter contains the following sections:
1.1 Warranty
1.2 Scope of the Manual
1.3 Safety
The Comet Executive™ Gas-Heated Flatwork Ironer (Figure 1-1) is a one-piece unit that dries and
irons sheets, pillowcases, table linen, and other types of atwork. The unit processes 100% polyester,
polyester/cotton blends or all-cotton fabrics. This unit is available with an ironing cylinder length of
56” (1400 mm), 66” (1600 mm), or 80” (2000 mm). This unit is not designed to process anything other
than atwork.
Like the rest of the CHICAGO
®
product line, the Comet Executive Gas is designed, manufactured,
and assembled in Chicago, Illinois. Before the CHICAGO
®
nameplate is axed to any machine, a nal
inspection is performed, including thorough testing under load conditions.
Any questions concerning the installation, operation, or repair of the Comet Executive Gas ironer
should be directed to your local authorized CHICAGO
®
dealer or:
Chicago Dryer Company (773) 235-4430
2200 North Pulaski Road Fax (773) 235-4439
Chicago, Illinois 60639-3737 E-mail service@chidry.com
Figure 1-1: The Comet Executive Gas provides high quality atwork nishing.
To Next Page
Loading...