Operating Principles Comet Executive Gas
5-2
Safety
The equipment described here has been
designed to work together to give a safe and
reliable machine. Changing the equipment or
controls may cause a malfunction that could
injure someone. Do not bypass any of the safety
features or controls. Do not replace components
except with factory-approved repair parts.
Questions about the operation of the unit can be
answered by your local authorized CHICAGO
®
dealer, or by the Chicago Dryer Company service
department.
5.1 Electrical System
The electrical components of the unit provide
the power to move the ironing cylinder, the
various rolls and ribbons, and to control operation
of the ironer.
Components in the electrical system are
located in the main electrical panel inside the
right endframe.
The majority of the protectors and distribution
items are in the main electrical panel. Some gas
system electrical components are located in the
left endframe.
Electrical system components include:
• Disconnect Switch and Fuses
• Step-Down Transformer
• Electrical Panel
To Next Page
Loading...