Maxi Comet Executive Exec-56-G - Return Section

Repair Comet Executive Gas
7-36
7.7 Return Section
Flatwork is directed around the ironing
cylinder by the return section (Figure 7-32),
which consists of the following components:
• Return ribbons (A)
• Return ribbon guide assembly (B)
• Return ribbon drive roll (C)
• Idler rolls (D1, D2)
The return ribbons hold the atwork in proper
contact with the heated cylinder, ensuring quality
atwork nish.
Various components of the return section
require periodic adjustment, replacement, or
occasional repair.
These procedures include:
• Return Ribbon Tension Spring
Replacement
• Return Ribbon Replacement
• Return Ribbon Drive Roll Friction
Material Replacement
A
B
C
D1
D1
Figure 7-32: Return section components.
TOC
INDEX