Comet Executive Gas Repair
7-3
WARNING
Know the proper lockout/
tagout procedures for
equipment during repair.
Follow the rules of your work
site. Failure to do so could
result in serious injury.
Do not repair or correct any
condition without reading
and understanding the
repair procedure.
Only qualied personnel
should troubleshoot and
repair this unit.
Always make sure that the
machine is cooled down and
that power is disconnected
before servicing the unit.
7.2 Parts Availability
Replacement and repair parts can be ordered
through your local authorized CHICAGO
®
distributor. Questions about the operation,
maintenance, troubleshooting, or repair of the unit
can also be directed to your distributor.
In addition, questions may be directed to
the Chicago Dryer Company factory Service
Department by calling (773) 235-4430.
NOTE: Use only factory warranty
tested and approved replacement
parts when repairing a Chicago
®
unit. They are designed for each
specic machine model and serial
number. Overnight shipment of
parts is available.
To Next Page
Loading...