Maxi Comet Executive Exec-56-G - Page 95

Comet Executive Gas Troubleshooting
6-3
6.4 Heating System
Pilot Ignition
TEMPERATURE Control Indicator Lamp Does Not Come On When Dial is
Turned to ON ............................................................................................................. 6-12
Pilot Ignition Irregular or Absent ....................................................................................... 6-12
Burner Ignition
Flame Does Not Travel Down the Entire Length of the Burner ........................................ 6-13
Gas Flow: Poor, Irregular, None ....................................................................................... 6-13
Burner Starts Normally, Then Shuts Down ...................................................................... 6-13
Burner Operation
Ironing Cylinder Heats to SET Temperature, but Will Not Ignite a Second Time ............. 6-14
TEMPERATURE Control Erratic or Does Not Work......................................................... 6-14
Temperature Sensor Not Working Correctly .................................................................... 6-15
Flames Coming From Ends of Ironing Cylinder ............................................................... 6-15
Excessive Wear on Temperature Sensor Contact Shoes ................................................ 6-15
6.5 Exhaust System
Exhaust Poor or None ...................................................................................................... 6-16
TOC
INDEX