11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
69
CAUTION
To protect the original paint system, a 3” wide area of paint must be re-
moved from all sides of the weld area before welding.
CAUTION
Prevent the date of manufacture decal from being damaged. Cover decal
when welding underride support brackets.
STEP 15 - ADJUST UNDERRIDE - Continued
10. Tack weld fl at, on underride
tube, to RH support bracket
(FIG. 69-1). Repeat for LH
support bracket.
TACK WELDING FLATS TO SUPPORT
BRACKETS (RH SIDE SHOWN)
FIG. 69-1
UNDERRIDE
TUBE
FLAT
RH UNDERRIDE
SUPPORT BRACKET
1/4”
2 PLACES
CAUTION
When using an electric welder, connect the welder to one of the parts being
welded, as close to the weld as possible. Failure to comply could result in
damage to cylinders and electrical parts.
To Next Page
Loading...
