USER Manual
42
If the button is pressed after the exposure range has been adjusted, X-ray
exposure will occur.
The wired remote control only performs X-ray exposure. Other settings and
oper
ations must be manipulated through the LCD screen on the device.
7.7 Battery
7.7.1
Mounting the battery inside the main body
Check that the DX-3000 is powered OFF.
The battery pack cover should be separated by sliding it backward after holding
down the latch (circled in Figure 7.10).
Figure 7.10 Battery cover separation
After the battery cover has been removed, the battery cam should be
inserted into main body. The battery pack should be inserted in the direction of the
To Next Page
Loading...
