USER Manual
47
8 Maintenance and storage
8.1 Maintenance
Keep the device and battery pack in a safe place where only qualified personnel have
access.
The collimating cone that comes into direct contact with the patient should be cleaned
by gently wiping with a clean cloth and rubbing alcohol.
Do not use the device near an active heater, heating device, etc.
Be sure to keep the DX-3000 and all parts in its storage cases while they aren't in use.
Do not alter the device. If the SEAL attached to the product is broken, free
A/S services will not be provided.
To ensure safe operation, perform regular check ups of the device and its parts with a
designated A/S center.
Avoid use/storage in places with the following characteristics:
- High moisture
- Direct sunlight
- Dusty/dirty
- High humidity
- No ventilation
-
High salinity
- Chemical substances or explosive gases
To Next Page
Loading...