234
Controls in detail
Driving systems
1 Sets current or higher speed
2 Sets current or lower speed
3 Cancels cruise control
4 Resumes at last set speed
Setting current speed
Accelerate or decelerate to the de-
sired speed.
Briefly lift the cruise control lever in
direction of arrow 1 or depress in di-
rection of arrow 2.
The current speed is set.
Remove your foot from the accelera-
tor pedal.
Cruise control is activated.
The selected speed appears in the multi-
function display for approximately 5 sec-
onds, and the corresponding
speedometer segments from the select-
ed speed to the vehicle maximum speed
are illuminated.
Canceling cruise control
There are several ways to cancel cruise
control:
Step on the brake pedal.
Cruise control is canceled. The last
speed set is stored for later use.
or
Briefly push the cruise control lever in
direction of arrow 3.
Cruise control is canceled. The last
speed set is stored for later use.
i
On uphill or downhill grades, cruise
control may not be able to maintain
the set speed. Once the grade eases,
the set speed will be resumed.
!
Moving the gear selector lever to
position N while driving also cancels
cruise control. However, the gear se-
lector lever should not be moved to
position N while driving, except to
coast when the vehicle is in danger of
skidding (e.g. on icy roads).
i
The last stored speed is canceled
when you turn off the engine.
To Next Page
Loading...
