EasyManua.ls Logo

MAYBACH 62 - Replacing Bulbs; Bulbs

Default Icon
506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
430
Practical hints
Replacing bulbs
Safe vehicle operation depends on prop-
er exterior lighting and signaling. It is
therefore essential that all bulbs and
lamp assemblies are in good working or-
der at all times.
Correct headlamp adjustment is ex-
tremely important. Have headlamps
checked and readjusted at regular inter-
vals and when a bulb has been replaced.
See an authorized Maybach Studio for
headlamp adjustment.
Front lamps
i
Back-up bulbs will be used when the
following lamps malfunction:
Turn signal lamps
Brake lamps
Parking lamps
Tail lamps
Bulbs
Lamp Type
1 Additional turn
signal and side
marker lamp
LED
2 Turn signal lamp SAE J573
2357 A
12.8 V-30CP
3 Side marker lamp W 5 W
4 Low beam and
high beam
Xenon
1
D2S-35 W
1 Bi-Xenon headlamps: For safety reasons (high
voltage), do not replace the Xenon bulb yourself.
See an authorized Maybach Studio.
5 High beam flasher H7-55 W
6 Parking and
standing lamp
W 5 W Blue
7 Fog lamp H7 55 W

Table of Contents

Related product manuals