400
Practical hints
What to do if …
Display Possible cause Possible solution
2
BRAKE PAD WEAR
VISIT WORKSHOP!
The brake pads have reached their wear
limit.
Have the brake pads replaced as
soon as possible at an authorized
Maybach Studio.
T
BRAKE MALFUNCTION
STOP VEHICLE
The SBC brake system is in the emergency
operation mode. Considerably greater
brake pedal force is required and the
stopping distance is increased.
The maximum speed is limited to 55 mph
(90 km/h).
Stop the vehicle as soon as it is safe
to do so.
Do not drive any further.
Prevent the vehicle from rolling
away by blocking wheels with
wheel chocks or other sizable,
heavy objects (
page 437).
Call for Roadside Assistance.
;
(USA only)
3
(Canada only)
BRAKE FLUID
VISIT WORKSHOP!
There is insufficient brake fluid in the res-
ervoir.
Risk of accident! Stop the vehicle
and notify an authorized Maybach
Studio. Do not add brake fluid! This
will not solve the problem.
Failure to follow these instructions in-
creases the risk of accident.
i
If you find that the brake fluid in the
brake fluid reservoir has fallen to the
minimum mark or below, have the
brake system checked for brake pad
thickness and leaks.
!
Brake pad thickness must be visually
checked by a qualified technician at
the intervals specified in the Mainte-
nance Booklet.
To Next Page
Loading...
