59
Getting started
Adjusting
Seat height
Press switch up or down in direction
of arrow 2.
Seat cushion tilt
Press switch up or down in direction
of arrow 3 until your upper legs are
lightly supported.
Seat backrest tilt
Press switch forward or backward in
direction of arrow 4 until your arms
are slightly angled when holding the
steering wheel.
Seat cushion depth
Press switch forward or backward in
direction of arrow 5 until your legs
are supported comfortably.
Head restraint height
Press switch up or down in direction
of arrow 6.
Head restraint tilt
Manually adjust the angle of the head
restraint.
Push or pull on the lower edge of the
head restraint cushion.
For more information, see "Seats"
(
page 127).
i
Adjust the head restraint in such a
way that it is as close to the head as
possible.
Warning! G
For your protection, drive only with prop-
erly positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the po-
tential for injury to the head and neck in
the event of an accident or similar situa-
tion.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
Adjust the head restraint in such a
way that it is as close to the head as
possible.
To Next Page
Loading...
