93
Safety and Security
Occupant safety
Removing
Remove the child seat.
Press release button 2 and fold in
anchors 3 until they engage.
!
Vehicles with a rear center seat*:
Make sure the seat belt for the center
seat can operate freely with a child
seat installed.
i
Non-LATCH type child seats may also
be used and can be installed using
the vehicle’s seat belt system. Install
child seat according to the manufac-
turer’s instructions.
Warning! G
Children too big for child restraint systems
must ride in back seats using regular seat
belts. Position shoulder belt across chest
and shoulder, not face or neck. A booster
seat may be necessary to achieve proper
belt positioning for children from 41 lbs
until they reach a height where a lap/
shoulder belt fits properly without a boost-
er.
Install child seat according to manufactur-
er’s instructions.
The child seat must be firmly attached in
the right and left side anchors 3.
An incorrectly mounted child seat may
come loose during an accident which could
result in serious injury or death to your
child.
Damaged or impact damaged child seats
or child seat mounting fittings must be re-
placed.
Do not leave children unattended in the
vehicle, even if the children are secured in
a child restraint system.
To Next Page
Loading...
