Maytag MXR65 - Page 33

33
Drain Extract No Drain Static Drain Reversing Drain
The Extract Sequence
Menu Item Description Default Limits
Drain Valve Only available on washers with both a normal Open and
normal Closed Drain valve.
1 1–2
RPM The suggested RPM depends on the Machine Type. – See Table A-5
Time The Extract Sequence Time.
(for 0 minutes the Extract sequence will be skipped)
(programmable in steps of 0.5 minutes)
4.5 min 0–15.0 min
Exit Return to Edit Program Menu.
Drain Extract No Drain Static Drain Reversing Drain
The No Drain Sequence
• The Drain/Extraction part of the programmed step is skipped.
IMPORTANT: For some specific functions “No Drain” must be programmed.
Example: If you want to program a Cool Down Sequence, then “No Drain” must be programmed between the Hot Wash and the Cool
Down Sequence.
Menu Item Description Default Limits
Exit Return to Edit Program Menu.
Drain Extract No Drain Static Drain Reversing Drain
Static Drain Sequence
Menu Item Description Default Limits
Drain Valve Only available on washers with both a normal Open and
normal Closed Drain valve.
1 1–2
RPM The suggested RPM depends on the Machine Type. – See Table A-5
Time The Static Drain Sequence Time.
(for 0 minutes the Static Drain Sequence will be skipped)
(programmable in steps of 0.5 minutes)
0.5 min 0–15.0 min
Exit Return to Edit Program Menu.
The drum is at standstill while the water is drained.
IMPORTANT: In a Static Drain Sequence, the garments are not distributed around the drum while the water is drained. When the Spin
Sequence starts, the garments are very imbalanced and the imbalance (tilt) function will be activated. To avoid imbalance, (tilt) activation,
do not program a Spin Sequence immediately after a Static Drain Sequence.