13
CLASSIC 15+ Robotic Pool Cleaner | User Instructions
8.4 LED Lights on the Power Supply
Connectivity LEDs
The connectivity LED light on the power supply has several modes:
1. Flashing blue light - waiting for Bluetooth® connection.
2. Steady blue light - connected via Bluetooth®.
3. Steady green light - power supply is now connected to the Wi-Fi® network and to the cloud.
4. Alternating blue and green light - power supply is connected via Bluetooth® and is trying to connect
to WiFi®.
It also flashes if connected to WiFi®, but is operating via Bluetooth® while using the remote-control.
ON/OFF LEDs
1. Steady blue light - Power supply is ON, and the pool cleaner is working.
2. Flashing green light - waiting for the next operation (delay mode or weekly timer).
3. Alternate blue/green/red lights – program updating remotely.
Please wait until process is completed.
4. Steady red light – error. Refer to troubleshooting.
Power supply ON/OFF button features:
1. Operating - Press the ON/OFF button for up to 5 sec.
2. Quick start - This feature activates a specific feature via the power supply.
*In selected models, these features can be changed via the app.
To activate the weekly timer press and hold the ON/OFF button for 5 seconds.
Leave the robot in the pool, it will clean every 2 days for a week. Rinse the filter every week.
The blue led light will blink 3 times.
3. Automation mode - This feature allows you to connect to your smart-home.
To activate the automation mode, press and hold the ON/OFF button for 15 sec.
The blue led light will blink 3 times.
To Next Page