Mazda 3 2004 - Convenient Ways to Use the Outside Mirrors

Convenient Ways to Use
the Outside Mirrors
Driving Position Memory
*
The angle of the outside mirrors can be
programmed to the Driving Position
Memory.
Refer to Driving Position Memory on
page 3-37.
Operation function after engine is
stopped
The angle of the outside mirrors can be
adjusted and they can be folded in and
out for about 40 seconds after the
vehicle power is switched from ON to
OFF.
Auto tilt-down outside mirror
function for reversing
*
The outside mirrors can be set to tilt
downwards automatically when
reversing the vehicle. When the vehicle
is finished reversing, the outside
mirrors return to their original angle.
1. Press the select switch on the side
of the door mirror to be tilted
down.
Turn on the indicator light of the
select switch.
2. Shift the shift lever/selector lever to
the R position.
The outside mirror on the side
where you pressed the select switch
will tilt downward.
NOTE
When any of the following condition is
met, the outer mirrors return to their
normal positions.

The vehicle power is switched to a
position other than ON.

The shift lever/selector lever is
shifted to a position other than R.

The select switch is pressed again.
Automatic glare prevention function
*
In conjunction with the glare
prevention function of the auto-type
rearview mirror, only the driver's side
outside mirror reduces the light from
the headlights of on-coming vehicles.
Driving
Mirrors
5-10
*Some models.
Mazda3_8LX5-EA23E_Edition2_new 2023-4-17 20:22:43