Initializing the Moonroof
*
If the moonroof does not operate
normally, do the following procedure:
1. Switch the vehicle power ON.
2. Press the tilt switch, to partially tilt
open the rear of the moonroof.
3. Repeat Step 2. The rear of the
moonroof tilts open to the fully
open position, then closes a little.
If the reset procedure is performed
while the moonroof is in the slide
position (partially open) it will close
before the rear tilt opens.
What to Do in Case of Emergency
The Moonroof Cannot Be Operated
*Some models.
8-35
Mazda3_8LX5-EA23E_Edition2_new 2023-4-17 20:22:43
To Next Page
Loading...
