Mazda 3 2004 - Cylinder Deactivation; How to Use the Cylinder Deactivation

Cylinder Deactivation
*
The cylinder deactivation is a function
designed to improve fuel economy by
deactivating 2 of the 4 cylinders while
driving.
How to Use the Cylinder
Deactivation
The cylinder deactivation function
automatically switches to 4 cylinders or
2 cylinders. The cylinder deactivation
function does not operate under the
following conditions.

(Manual transmission)
The selector lever is in the N/R
position.

(Automatic transmission)
The selector lever is in the P/N/R
position.

The gear is in 1st gear.

The engine oil temperature or engine
coolant temperature is low.

After disconnecting the battery
terminals for some reason, such as
for battery replacement.
Driving
Cylinder Deactivation
*Some models.
5-23
Mazda3_8LX5-EA23E_Edition2_new 2023-4-17 20:22:43