Mazda 3 2004 - Page 146

Stopping The Engine
1. Stop the vehicle.
2. (Manual transmission)
Shift into neutral.
(Automatic transmission)
Shift the selector lever to the P
position.
3.
The engine stops and the vehicle
power is switched OFF.
Switching the Vehicle power Position
Press the push button start without
depressing the clutch pedal (manual
transmission) or brake pedal
(automatic transmission).
Each time the push button start is
pressed, the vehicle power position is
switched in the order of ACC, ON, and
OFF.
When the vehicle power is switched to
ACC, the push button start indicator
light (amber) turns on.
When the vehicle power is switched
OFF and a door is opened/closed or
locked, the push button start indicator
light (amber) turns
off.
NOTE
(Automatic transmission)
If you leave the vehicle power switched
to ACC while the selector lever is in
the P position, the vehicle power is
switched OFF in about 25 minutes.
Driving
Push Button Start
5-15
Mazda3_8LX5-EA23E_Edition2_new 2023-4-17 20:22:43