Mazda 3 2004 - Page 77


Due to variations in the design of child-restraint systems, vehicle seats and seat
belts, all child-restraint systems may not fit all seating positions. Before purchasing
a child-restraint system, it should be tested in the specific vehicle seating position
(or positions) where it is intended to be used. If a previously purchased
child-restraint system does not fit, you may need to purchase a different one that
will.
Infant seat
An infant seat provides restraint by bracing the infant's head, neck and back against
the seating surface.
Equal to Group 0 and 0+ of the
UNR
44 and
UNR
129 regulation.
Child seat
A child seat restrains a child's body using the harness.
Equal to Group 1 of the UNR 44 and UNR 129 regulation.
Booster seat
A booster seat is a child restraint accessory designed to improve the fit of the seat
belt system around the child's body.
Equal to Group 2 and 3 of the UNR 44 and UNR 129 regulation.
Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
3-52
Mazda3_8LX5-EA23E_Edition2_new 2023-4-17 20:22:43