Form No. 8P95-EA-00G
Driving Your Mazda
5-2
♥042-1CE
Ignition Switch Positions
Without immobilizer
system
J94A4001A
■ ON
This is the normal running position
after the engine is started. The warning
lights (except brakes) should be
inspected before the engine is started
(page 5-35).
With immobilizer
system
J94S5001
■ START
The engine is started in this position. It
will crank until you release the key;
then it returns to the ON position. The
brake warning light can be checked
after the engine is started (page 5-35).
■ ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
■ LOCK
The steering wheel locks to protect
against theft. Only in this position can
the key be removed.
To Next Page
Loading...
