Form No. 8P95-EA-00G
*Some models.
Knowing Your Mazda
3-22
♥134-1B1E
Immobilizer System*
If the engine is started without the
proper key, the immobilizer system
will cause the engine to stall, thereby
helping to prevent the theft of your
vehicle.
If the system is working properly, the
warning light will come on when the
ignition switch is turned to the START
position. The light will go out when
the engine starts.
If the light flashes rapidly, fails to
come on, or comes on and stays on, it
indicates a system malfunction. If any
of these occur, contact an Authorized
Mazda Dealer as soon as possible.
CAUTION
!
Changes or modifications not
expressly approved by the
manufacturer could void the user’s
authority to operate the equipment.
NOTE
This device complies with part 15
of the FCC Rules and with
RSS-210 of Industry Canada.
Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference
that may cause undesired
operation. (Outside transmissions
may momentarily interfere with
the device’s operation.)
To Next Page
Loading...
