Form No. 8P95-EA-00G
Appearance Care
7-8
Pay special attention to removing salt,
dirt, mud, and other foreign material
from the underside of the wings, and
make sure the drain holes in the lower
edges of the doors and rocker panels
are clean.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits
can damage the finish if not removed
immediately. When prompt washing
with plain water is ineffective, use a
mild soap made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Don’t allow
soap to dry on the finish.
After washing the vehicle, dry it with a
clean chamois to prevent water spots
from forming.
WARNING
!
Driving with Wet Brakes:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to
one side when braking could
result in a serious accident. Light
braking will indicate whether the
brakes have been affected. Dry
the brakes by driving very slowly
and applying the brakes lightly
until brake performance is
normal.
▼ Waxing
Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle
before waxing it. In addition to the
vehicle body, wax the metal trim to
maintain its luster.
1. Use wax which contains no
abrasives. Waxes containing
abrasive will remove paint and
could damage bright metal parts.
2. Use a good grade of natural wax
for metallic, mica, and solid colors.
3. When waxing, coat evenly with the
sponge supplied or a soft cloth.
To Next Page
Loading...
