Form No. 8P95-EA-00G
Driving Your Mazda
5-73
J94S5125_b
▼ Windshield defrosting and
defogging
1. Set the mode selector switch to the
position.
2. Set the temperature control dial to
the desired position.
3. Set the fan control dial to the
desired speed.
WARNING
!
Foggy Windshield:
Using the position with the
temperature control set to the cold
position will cause the outside of
the glass to fog up. Your vision
will be hampered, which could
lead to a serious accident. Set the
temperature control to the hot or
warm position when using the
position.
NOTE
• When the mode selector switch
is set to or , the
outside air position is selected
automatically. The air intake
selector switch cannot be
changed to the recirculated air
position.
• For maximum defrosting, set
the temperature control dial to
the extreme hot position and the
fan control dial to position 4.
• If warm air is desired at the
floor, set the mode selector
switch to the position.
To Next Page
Loading...
