Form No. 8P95-EA-00G
Maintenance
8-29
♥083-18A1E
■ Inspecting Automatic Transaxle
Fluid Level
The automatic transaxle fluid level
should be inspected regularly. Measure
it as described below.
The volume of fluid changes with the
temperature. Fluid must be checked at
idle without driving at normal
operating temperature.
CAUTION
!
• Low fluid level causes
transaxle slippage. Overfilling
can cause foaming, loss of
fluid, and malfunction.
• Use specified fluid (page 10-2).
A nonspecified fluid could
result in transaxle malfunction
and failure.
★♥Q083-19A2E
1. Park on a level surface and set the
parking brake firmly.
2. Idle the engine about two minutes.
Push down on the brake pedal.
3. Move the shift lever through all
ranges and set it at P.
To Next Page
Loading...
