Mazda 626 - Page 316

Form No. 8P95-EA-00G
Maintenance
8-28
Visually examine the lines and hoses
for leaks and damage.
1. Park on a level surface, well off the
right-of-way, and set the parking
brake firmly.
2. Turn off the engine and allow it to
cool.
3. Remove the filler cap and attached
dipstick.
4. Wipe them clean and put them
back.
5. Remove again and inspect the
level.
6. It must be between HIGH and
LOW. Add fluid if necessary.
Don’t overfill.
083-16A2E
If new fluid is required frequently,
consult an Authorized Mazda Dealer.
CAUTION
!
To avoid damage to the power
steering pump, don’t operate the
vehicle for long periods when the
power steering fluid level is low.
NOTE
Use specified power steering fluid
(chart, page 10-2).