Form No. 8P95-EA-00G
Maintenance
8-23
For mixture percentage:
Volume
Protection
Antifreeze
solution
Water
Above –16°C (3°F) 35% 65%
Above –26°C (–15°F) 45% 55%
Above –40°C (–40°F) 55% 45%
WARNING
!
Removing the Cooling System
Cap:
Removing the cooling system cap
or drain plug while the engine is
running or hot is dangerous. This
might lead to cooling system and
(Continued)
engine damage and could result
in serious injury from escaping
hot coolant or steam. Turn off the
engine and wait until it’s cool.
Even then, be very careful when
removing the cap or drain plug.
Wrap a thick cloth around it and
slowly turn it counterclockwise to
the first stop. Step back while the
pressure escapes. When you’re
sure all the pressure is gone, press
down on the cap — still using a
cloth — turn the cap, and remove
it.
♥083-12D1E
Cooling system cap
J94A7009A
2.0-liter engine
Loosen
Tighten
Loosen
Tighten
Drain plug
To change coolant
1. Remove the cooling system cap.
2. Only when the engine is cool,
loosen the radiator drain plug and
drain the coolant into a suitable
container.
To Next Page
Loading...
