Mazda 626 - Inspecting Brake;Clutch Fluid Level

Form No. 8P95-EA-00G
J94A7014
Maintenance
8-25
9. After the engine has cooled,
remove the cooling system cap and
inspect the coolant level. If it’s low,
repeat steps 5 to 8.
Because this procedure requires
technical expertise, we recommend
that it be done by an Authorized
Mazda Dealer.
NOTE
Mixing green coolant with orange
coolant could decrease the service
life expentancy of the coolant. Use
only genuine Mazda orange
colored or equivalent coolant
♥♥083-13A2E
J94A7013
■ Inspecting Brake/Clutch Fluid
Level
The brakes and clutch draw fluid from
the same reservoir.
Inspect the fluid level in the reservoir
regularly. If it’s low, add fluid until it
reaches MAX. It should be kept at
MAX.
Before adding fluid, thoroughly clean
the area around the cap.