Form No. 8P95-EA-00G
Driving Your Mazda
5-72
NOTE
When maximum cooling is
desired, set the temperature control
dial to the extreme cold position
and set the air intake selector
switch to the recirculated air
position, then set the fan control
dial to position 4.
If warmer air is desired at floor level,
set the mode selector switch at the
position and adjust the
temperature control dial to maintain
maximum comfort.
The air to the floor is warmer than air
to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
CAUTION
!
When using the air conditioner
while driving up long hills or in
heavy traffic, closely monitor the
temperature gauge.
The air conditioner may cause
engine overheating. If the gauge
indicates overheating, turn the air
conditioner off. (Refer to
Overheating on page 6-2.)
To Next Page
Loading...
