Form No. 8P95-EA-00G
Driving Your Mazda
5-88
1. To adjust the time, press the clock
button for about 2 seconds until a
beep is heard.
2. The clock’s current time will flash
until the time is set.
Minute set
Hour set
07L032–007
3. To advance the hours, press the
hour set button (H) to advance the
minutes, press the minute set button
(M) while the time is flashing.
4. Press the clock button again to start
the clock.
NOTE
If the power supply to the unit is
interrupted (if the fuse blows or
the vehicle’s battery is
disconnected), the clock will need
to be reset.
To Next Page
Loading...
