McHale 991 - Available Wrapping Programs

McHale 991 High Speed Round Bale Wrapper
38
7.3 Available wrapping programs
The following list shows the list of wrapping programs that are available. The items that
are greyed out are not used/available on this machine. (See ‘Wrapping sequence/
program’)
Program Description Table start position
991 BE Standard o
991 BE, 991 BER
standard field operation
Cut & hold at left side of
the machine
Combi trailed oo
Not used on 991 B series/
991 L series
Combi standard IL
Not used on 991 B series/
991 L series
Remote r97L
991 LBER with bale lift
arm
Cut & hold at the left side
of the machine
Remote r94 991 LBER standard
Cut & hold at the front of
the machine
991 BE Remote rt
991 BER remote control
operation
Cut & hold at the front of
the machine
Remote r Program not in use
Side Load Remote 991 LBER side load
Cut & hold at the left side
of the machine
High Speed High Speed
Cut & hold at the left side
of the machine
High Speed Remote High Speed Remote
Cut & hold at the front of
the machine