McHale 991 High Speed Round Bale Wrapper
50
8
Wrapper operation
8.1 Preparing the machine for wrapping
1. Load the plastic film into the dispenser running it through the rollers. Attach the
film to the bale. (See ‘Loading plastic film’)
2. Turn on the oil supply.
3. Unlock the transport lock. Do not attempt to lower the bale lift arm with the
transport lock still engaged.
4. Lower the bale lift arm to the ground.
5. Lower the bale damper.
6. Switch on the electronic control box and set to ‘Automatic’ mode.
7. Ensure the table is in the correct starting position. (See ‘Electronic control box
functions’). The control box needs to be set on “manual” to work this function.
8. The machine is now ready to wrap.
WARNING: Keep out of the ‘Danger Zone’
Keep all persons outside of the ‘Danger Zone’ during all machine
operations! (See ‘Danger Zone’)
ENVIRONMENT: Recycling of the plastic film
Respect the environment! Never dump or burn waste plastic film. It’s
toxic! Always take waste materials to a recycling centre.
Transport lock, unlocked 991HS machine
To Next Page
Loading...
