McHale 991 High Speed Round Bale Wrapper
68
11
Machine maintenance
To maintain the machine in good working order it is necessary to carry out preventative
maintenance regularly. The following section gives details of how this may be carried
out and how often it will be required.
Replace any electrical or hydraulic devices immediately, at the first sign of malfunction
or failure, as these components affect the functionality, sequencing and thus safety of
operation. Never use a machine where a malfunction exists! Contact your McHale
dealer to achieve a solution. Always think ‘Safety First’!
11.1 Maintenance intervals
The following intervals should be adhered to, in order to ensure a long and efficient life
for the machine and maximum safety of personnel. They assume constant working
during the wrapping season.
First 5 working hours
1. Check all nuts and bolts for tightness and tighten, if necessary
2.* Grease bale lift arm hydraulic cylinder ends
WARNING: Wear proper safety equipment & follow all instructions
Ensure to wear proper safety equipment at all times when working with
the machine, such as gloves, eye protection, etc. and follow all safety
decals and instructions.
To Next Page
Loading...
