McHale F5500 Baler
31
The PTO wide angle joint must never exceed
80 degrees, both when stationary or during operation
Permanent damage may result otherwise
(CST00658)
Wheel direction
(CST00711)
Diagram of net path through feeding rollers
(CST00713)
Knife selection tap
Only applicable to machines with selectable
knife option
(CST00714) 15 Knives
(CST00793) 25 Knives
Decal indicating the settings on the variable pulley to
adjust the tension on the net
(CST00716)
Decal indicating the locations to be greased regularly
and at what intervals in working hours
(CST00743)
To Next Page
Loading...
