McHale F5500 - Machine lifting guidelines

McHale F5500 Baler
33
4.8 Description of the serial number plate
The following is a description of the serial plate content:
A. Product description
B. Model name/number of the machine
C. Year of manufacture of the machine
D. Model year of the machine
E. Serial number of the machine
F. Name of the manufacturer
G. Vehicle category
H. Machine type approval number
I. Vehicle identification number (VIN)
J. Technically permissible maximum laden mass
K. Vertical load on the coupling point
L. Technically permissible maximum mass per axle
4.9 Machine lifting guidelines
WARNING: Machine lifting
 Only use chains or strapping that are rated for a minimum load
of two tonnes (2,500 kg) per chain or strap when using the two
lift eye locations on the chassis, shown below
 The crane or lifting device must be capable of lifting a
minimum load of four tonnes (5,000 kg)
 Never go under a suspended machine or attempt to try and
stop it if moving erratically, death or serious injury may result
 Always be observant of people and objects around the
suspended machine and do not allow the machine to impact
heavily on the ground after suspension or movement
A
B
C
D
E
F
G
H
I
J
K
L