McHale F5500 Baler
36
5.3 Attaching to drawbar
The drawbar is to be attached so that the machine is horizontal to the ground. (See
‘Drawbar adjustment’). Machines are set up for hitching to the tractor drawbar. Once
the tractor is attached to the drawbar, attach the PTO shaft. Depending on the country
of use a safety chain may also be required. Detach in reverse order of attachment.
CAUTION: Electrical power supply
Do not use any other electric power supply for the electronic control
system, otherwise damage may occur.
CAUTION: Tractor drawbar and coupling device must be compatible
Check that the tractor drawbar is compatible with the coupling device
on the machine. If in doubt, consult your McHale dealer.
To Next Page
Loading...
