McHale F5500 - Page 5

McHale F5500 Baler
5
5.9 Lighting system 40
6 Machine requirements & preparation 41
6.1 Net requirements 41
6.2 Care of the net roll 41
6.3 Care of the net wrapping system 42
6.4 Loading & operating the netter system 42
6.5 Net layer adjustment setting 44
6.6 Chopper unit knife removal & installation 46
6.7 Automatic lubrication system 50
6.8 Gearbox oil 54
6.9 Tyre inflation pressures 55
6.10 Wheel chocks 56
6.11 Drawbar & PTO shaft stand usage 57
6.12 Drawbar adjustment 60
6.13 PTO shaft adjustment & maintenance 62
7 Electronic control system 66
7.1 Control box functions 67
7.2 Control box features 68
7.3 Menu structure 74
7.4 Warning messages 77
8 Road traffic safety & operation 81
8.1 Before travelling on any public roadway 81
9 Field operation & machine adjustments 83
9.1 Break-in period 83
9.2 Swath preparation 83
9.3 Pick-up reel height adjustment 84
9.4 Crop guard adjustment 85
9.5 Crop roller adjustment 85
9.6 Unblocking system 86
9.7 Chopping system 87
9.8 Selectable knives 87
9.9 Knife pressure monitoring 88
9.10 Net tension adjustment 89
9.11 Net brake adjustment 91
9.12 Bale density gauge 92
9.13 Setting chamber pre-charge pressure 92
9.14 Bale size adjustment 93
9.15 Chamber door lock 94
9.16 Brake overview (if fitted) 95
9.17 Adjusting pick-up float springs 100
9.18 Chain adjustments 102
10 Machine maintenance 105
10.1 Maintenance intervals 105
10.2 Tightening torque values 108
11 Storage 109
11.1 End of season 109