MX200
•
switch to Independent to set any individual input
to On.
When Independent is selected, you can select On or
SETUP: GENERAL > FIRMWARE
SETUP: GENERAL > RCLOCK
prevent the front IR sensor from receiving IR
commands from a remote control. The default for
lock to OFF (the default).
SETUP: GENERAL > AUTO OFF
there has been an absence of an audio input signal on
both channels.
When there is a power control connection between
• HDMI 1
• HDMI 2
• HDMI 3
•
• HDMI TV
• Optical 1
• Optical 2
•
•
• AUX 1
• AUX 2
• PHONO
General Setup Menu (continued)
To Next Page
Loading...
