MX200
Packing Instructions Part List
Qty Part Number Description
as shown below.
It is very important that the four plastic feet
are attached to the bottom of the equipment.
This will ensure the proper equipment location
on the bottom pad. Failure to do this will result in
shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition.
If a shipping carton or any of the interior part(s)
Department of McIntosh Laboratory. Refer to page 2.
Please see the Part List for the correct part numbers.
SPACER
PADS
SLOTTED
FOAM (2)
DIVIDER
FOAM
ACCESSORY
BOX
MICROPHONE
STAND
MICROPHONE
AND CABLE
MINI BOOM
MICROPHONE
ADAPTER
To Next Page
Loading...
