McIntosh MX200 - Audio Setup Menu

16
SETUP: AUDIO > SUB LEVEL
Subwoofer level adjust allows for adjusting your


SETUP: AUDIO > BASS SYNC


(LFE) may be out of sync and delayed. This function
allows you to correct the delay with an adjustment of

SETUP: AUDIO > AUDIO DELAY
Audio delay (Lip Sync) compensates for incorrect
timing between video and audio. When auto lip

automatically corrected with compatible TVs. The
adjust option allows you to manually adjust the delay

SETUP: AUDIO > SURROUND MODE
Audio Setup Menu
The audio setup menu contains the following
options:
Setting Options
Sub Level 
Bass Sync 
Audio Delay (Lip Sync) 
Volume Scale, Limit
Surround Mode 
 ON, AUTO, OFF
Note: Some options and settings are only available on the browser
version of the setup menu these are indicated with an *.
Setting Options
Music Through, Auto, Dolby Surround, Neural: X,
Multich Stereo, Stereo
Movie Through, Auto, Dolby Surround, Neural: X,
Multich Stereo, Stereo
 Through, Auto, Dolby Surround, Neural: X,
Multich Stereo, Stereo
Volume Submenu Options
Setting Options
Scale Linear, dB Level
Limit 
SETUP: AUDIO > VOLUME > SCALE
There are two choices for how to display the
volume. The default is a volume scale linear which

second option is volume scale dB level. This will


Note: The displayed dB scale increments are not uniform as they
have been designed to give a meaningful level adjustment
depending on the actual level being listened to.

using the slider. Slide towards the right to increase
and to the left to decrease the volume level. The
current volume percentage for the linear scale or dB

SETUP: AUDIO > VOLUME > LIMIT


threshold for how high the volume level can be set.

of these three volume limits:
• 
• 
• 

level can not be set above the selected volume limit.
In the surround mode setup, you can assign a
surround mode to each of three sound categories:
• Music
• Movie
• 
These three sound categories can be assigned to an
input using the trim menu, for more information refer

easier for someone unfamiliar with DTS or Dolby to
select the proper surround mode by selecting Music,

following choices in setup:
• Through
• AUTO (default)
• Dolby Surround
• DTS Neural:X
• 
• Stereo
The surround mode represented by the Trim

in setup. If no assignment has been made, the default
for each is Auto.