EasyManua.ls Logo

MDC ROBSON XTT 2021 - Electrical Safety Precautions; Electrical Hazard Warnings; 240 V System and Connection Rules

MDC ROBSON XTT 2021
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.marketdirect.com.au Ph: 1300 494 494
8
Electrical Safety
Failure To Follow These Instructions May Result In Death Or Serious Injury!
Warning
When working with electrical equipment or lead acid batteries, have someone
nearby in case of an emergency.
Study and follow all the battery manufacturer’s specic precautions when
installing, using, and servicing the battery connected to the inverter.
Wear eye protection and gloves.
Keep unit away from moist or damp areas.
Avoid dropping any metal tool or object on the battery. Doing so could create a
spark or short circuit which goes through the battery or another electrical tool
that may create an explosion.
Warning
Shock Hazard! Keep Away From Children
Avoid moisture. Never expose unit to snow, water, etc.
Unit provides 230 VAC, treat the AC output socket the same as regular wall AC
sockets at home.
Read and understand the information in the manual before operating this
equipment
The 240v electrical system in your camper has been certied by a trade qualied person. Under no circumstances
should an unqualied person interfere with, modify, or repair this system. An RCD safety device is tted to this
camper for your safety.
Always use a 15amp lead to connect to mains power.
Do not modify the earth pin to accommodate a lesser lead.
When connecting to 10amp mains, always use an approved adapter.
Never coil power leads when in use. Lay the lead out in lengths in a safe manner that prevents
creating a trip hazard.

Table of Contents

Related product manuals