MDC ROBSON XTT 2021 - Safety Chains and Connections; Using Rated Shackles; Attaching Safety Chains; Connecting Electricals and Breakaway

www.marketdirect.com.au Ph: 1300 494 494
22
Safety Chains and Shackles
Rated shackles
Always use load rated shackles applicable to the weight of your trailer.
Attaching Chains
When attaching chains, you must always cross them and attach each chain to the diagonally opposite side of the
towbar. Ensure chains are not too long and where necessary attach to links further back from the end.
Periodically check the chains for visual wear or damage. If worn or damaged, arrange for these to be replaced with
approved, certied and suitably rated chains.
Connecting the Electrics
When connecting ensure the electric cables to your tow vehicle cannot drag on the road or foul the coupling. If
necessary, use zip ties or like keep them neat and safe from damage.
Connecting the Breakaway
The breakaway lanyard is connected to a simple switch on the drawbar. When connecting the lanyard to the tow
vehicle it should be connected to a solid part of the vehicle. Do not incorporate its connection with the safety
chains.