www.marketdirect.com.au Ph: 1300 494 494
71
42 MONTHS / 35,000KM SERVICE CHECKED
Hitch
Inspect for damage and lubricate. Check bolt Torque to 90Nm
Hand brake Check cable and adjust if necessary
Hand winch Check brake function and webbing
Suspension Lubricate and check bushes for excess movement. Torque bolts to 190Nm
Brakes Inspect and adjust. Check lining thickness and drum wear
Wheel bearings Remove, clean and re-lubricate. Inspect for wear and replace if necessary
Wheel Nuts Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Tyres Check for damage and pressure
Gas System Leak, test, check stove operation and hose/coupling condition
Battery Check terminals and voltage at full charge
Seals Check condition and correct latch/lock adjustment for correct 30-50%
compression
Wheel Alignment Check wheel alignment. 0-0.5 deg camber, 2-3mm Toe In.
General xings Check all structural xing are secure.
Date: Service Person:
Dealer Stamp:
To Next Page
Loading...
