Mecmesin MultiTest 1-dV - 1 Items Supplied with the Test Stand; Accessories

MultiTest-dV Operating Manual Mecmesin  5
1. Items Supplied with the Test Stand
When ordering a MultiTest-dV test stand the following components are supplied:
 MultiTest-dV test stand (0.5, 1.0 or 2.5 kN),
 Dovetail gauge bracket (for fitting a gauge to the crosshead),
 Allen key for tightening crosshead to gauge bracket,
 Mains cable,
 Document: A Guide to Safe Use of Mecmesin Mains Powered Test Systems,
 Document: MultiTest-dV Compression and Tension Test Stands, Operating
Manual,
Accessories
For a full range of digital force gauges, ELS devices, extensometer and accessories,
please go to the Mecmesin website www.mecmesin.com, or your local distributor, as
listed on the back cover.
 For connection of the stand to your computer, a Mecmesin supplied 2m USB B to USB
A cable communications cable is required (part no. 351-093),
 When using a Mecmesin Advanced Force Gauge (AFG) use communications cable
part no. 351-092 to connect the gauge to the MultiTest-dV,