Playing two Voices Simultaneously-DUAL
1. Press the [DUAL] button.
It turns on the Dual function. “VOICE R2” and “DUAL” light up on
display. LCD shows the current dual voice number and name.
2. Selecting a voice for VOICE R2.
Use the data dial, [+/YES] and [-/NO] button, or Voice Select
buttons to select a dual voice.
3. Play the voices.
Play the keyboard, and you will hear two different voices being
played together, just like two different instruments being played at
the same time.
Note:
When the keyboard is split, only the right hand area will have the Dual
voice function.
Playing Different Voices with Both Hands-
LOWER
1. Press the [LOWER] button.
It turns on the Lower function. The keyboard is split into the left and
right areas, each with a different voice. “VOICE L” and “LOWER”
light up on display. LCD shows the current lower voice number and
name.
2. Selecting a voice for VOICE L.
Use the data dial, the [+/YES] button or the [-/NO] Button to select a
lower voice.
3. Play the voices.
Play the keyboard with both hands, and you will hear two different
voices from the two areas.
Split Point
The key that separates voice L and voice R1/R2 is called the “split
point”. The split point is set to F#3 at the factory setting. However you
can assign it to any other key. Please refer to Other Functions.
Touch
The keyboard is equipped with a touch response feature that lets you
dynamically and expressively controls the level of the voice with your
playing strength, just as on an acoustic instrument.
The keyboard features 5 touch types to choose from: off,1-5.
1. Press the [TOUCH] button. The LCD shows the current touch level.
2. Use the data dial, the [+/YES] button, the [-/NO] button or the
[TOUCH] button to change the touch response level. Default level of
touch response is 3.
If the value is set to OFF, that means no touch response to
keyboard.
10
Playing Voices
C
M
Y
CM
MY
CY
CMY
K
AW_A810_Manual_G01_170809.pdf 10 17/8/9 16:21
To Next Page
Loading...
Need help?
General
