With the built in digital effects, you can add ambiance and depth to
your performance in a variety of ways such as adding reverb that
makes it like you are playing in a concert hall or adding harmony notes
for a full, rich sound.
1. The DSP effect is set to ON when keyboard is power on.
2. Press [DSP] button to switch DSP effect on or off.
Note:
There may be a slight break or noise if you switch on/off the DSP
when the style or song is playing.
The Mixer allows you to adjust separately the volume for each track.
1. Press the [MIXER] button.
Enter the Mixer menu. LCD shows the current parameter item.
2. Press [MIXER] or [ENTER] to select a parameter item, then use the
Data Dial or the [+/YES]/[-/NO] button to adjust the volume of the
selected item.
Press and button simultaneously to turn off the volume of the
selected item.
Press[+/YES]and[-/NO]button simultaneously again to turn on the
part volume.
3. Any time press [EXIT] to quit the Mixer menu.
Parameter items and the volume range in the Mixer menu:
23
DSP Effect
Mixer
Option
Rhythm s VOLUME
Rhythm m VOLUME
BASS VOLUME
Chord 1 VOLUME
Chord 2 VOLUME
Chord 3 VOLUME
Phrase 1 VOLUME
Phrase 2 VOLUME
VOICE R1 VOLUME
VOICE R2 VOLUME
VOICE L VOLUME
USB Device Playback Volume
LCD Display
XXX Rhythm_s
XXX Rhythm_m
XXX Bass
XXX Chord1
XXX Chord2
XXX Chord3
XXX Phrase1
XXX Phrase2
XXX Upper1
XXX Upper2
XXX Lower
XXX U_Disk
Range
0－127
0－127
0－127
0－127
0－127
0－127
0－127
0－127
0－127
0－127
0－127
0－127
Note:
It will exit the Mixer Menu if there is no operation in 5 seconds.
C
M
Y
CM
MY
CY
CMY
K
AW_A810_Manual_G01_170809.pdf 23 17/8/9 16:21
To Next Page
Loading...
Need help?
General
