Sustain
1. When the sustain is turned on, “SUSTAIN” lights up on display, and all
notes you play will have a longer sustain.
2. Press the [SUSTAIN] button to turn the SUSTAIN effect ON or OFF.
Note:
When using a sustain pedal, you can produce a much stronger and more
natural sustain effect than by using the [SUSTAIN] button.
Pitch Bend
Use the pitch bend wheel to bend notes up (roll the wheel away you) or
down(roll the wheel toward you ) while playing the keyboard.The pitch
bend wheel is self-centering and will automatically return to normal pitch
when released.
With the pitch bend wheel, you can easily imitate the pitch bend effect of
the guitar, violin, saxophone or other instruments, and make your perfor-
mance more vivid.
Modulation
The Modulation function applies a vibrato effect to notes played on the
keyboard. Press the [MODULATION] button while playing the keyboard
then you will hear the vibrato effect.
Transpose
Transpose function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in semitone steps.
1. Press [TRANSPOSE +] or [TRANSPOSE -] to adjust the value from
-12 to +12 semitones.
2. Press [TRANSPOSE +] and [TRANSPOSE -] or press [+/YES] and
[-/NO] simultaneously, it will set the value to default: 0.
Octave
The Octave function will shift the pitch up or down by 2 octaves for voice
R1, R2 and L respectively.
1. Press [OCTAVE +] or [OCTAVE -] to change the octave value over the
range of -2 to +2.
2. Press [OCTAVE +] and [OCTAVE -] or press [+/YES] and[-/NO]
simultaneousl, it will set the value to default: 0.
Note:
After adjusting the octave, notes in the highest and lowest keyboard range
may not sound normally. This is normal.
Playing Voices
11
C
M
Y
CM
MY
CY
CMY
K
AW_A810_Manual_G01_170809.pdf 11 17/8/9 16:21
To Next Page
Loading...
Need help?
General
